Information
Local trade with only 92 hours. comes with loader, bucket, quick hitch, tiller and pallet forks. Ask the sales team about our low rates.
Highlights
- $39,900.00
- Prince Albert, Saskatchewan
- Pre-Owned
- 2022
- John Deere
- 3 Series 3025E
- Family: EYDXL1.64NDA / FYDXL1.64NDA / GYDXL1.64NDA | model: 3TNV88F-EPJT2
- Hydrostatic transmission (HST)
- Diesel
- Available
Specifications
- 2022
- John Deere
- 3 Series
- 3025E
- Compact
- Family: EYDXL1.64NDA / FYDXL1.64NDA / GYDXL1.64NDA | model: 3TNV88F-EPJT2
- Yanmar®
- SAE J1995 rated power: 24.4 hp (18.2 kW) 24.7 PS at 2400 rpm | Starter size: 1.9 hp (1.4 kW)
- At rated speed: 53.4 lb-ft (72.4 Nm)
- 2400 rpm
- 100.2 cu in. (1.64 L)
- Natural
- Final Tier 4
- Three | Cast-in-block
- 3.46 in (88 mm)
- 3.54 in. (90 mm)
- 19.1:1
- Water pump
- Pressurized
- Dual element
- Diesel
- Direct
- Power take-off (PTO) power: 17.4 hp (13 kW)
- 540 rpm
- Control: Independent
- Spur gear
- Hydrostatic transmission (HST)
- Ranges: Four gears and two ranges
- Wet disk
- Power steering
- Wet disk | for mid and rear PTO: Wet disk
- R1 Bar: 7-14 / R3 Turf: 27x8.5-15 / R4 Industrial: 25x8.5-14 / R4 Industrial: 27x8.5-15
- R1 Bar: 11.2-24 / R3 Turf: 41x14-20 / R4 Industrial: 15-19.5 / R4 Industrial: 43x16-20
- 500 CCA
- 55 amp
- Open center
- Rated output: Steering - 4 gpm (15 L/min) | Implement - 5.3 gpm (20.2 L/min) / 9.3 gpm (35.2 L/min)
- Dual gear
- 2495 psi (172 bar)
- Category 1
- Front axle clearance: Minimum: 11.8 in. (299 mm) / Maximum: 13.1 in. (333 mm)
- 62.7 in. (1593 mm)
- without brakes: 2.9 m (9.4 ft)
- 24-in. behind link arms: 1356 lb (615 kg)
- 7.5 U.S. gal. (28.5 L)
- 1940 lb (880 kg)
- 2645 lb (1200 kg)
- Transmission: 22 qt (20.8 L)
- Crankcase with filter: 4.8 qt (4.5 L)
- (open-station; cab): OOS - 1181 kg (2603 lb)
- Draft control sensing: Position control | Rollover protective structure: Foldable | Platform - flat/straddle: Straddle | Gear shift location - console/floor: Left-hand side
